Casting moulds and objects
How can you quickly cast objects with Vosschemie Benelux | V-Sure casting resin?
There are several products you can use to cast moulded parts. But the most important thing is what or what result do you want to achieve? Are you looking for something colourless or coloured? Should it remain transparent or should you not be able to see through it?
Does it have to be lightweight or very heavy? Should you be able to work on it afterwards, by sanding, milling or turning it? If you wish to cast something colourless, you can use Epoxy Clear. This casting resin can be poured in thin or thick layers.
Would you like to cast something, e.g. a flower or an object, in a colourless resin? Then use Polyester GTS, a crystal-clear casting resin.
If you want to colour these resins with a transparent pigment, you should use the universal PU pigments. If it has to be translucent, work better with the polyester pigments when working with a polyester resin.
If you wish to make your object lightweight, add Aerocell to your casting resin. This will make the volume swell and it will weigh less. Conversely, you can make your cast heavier by adding quartz sand. This results in so-called polymer concrete, which is up to four times stronger than regular concrete.
For easy sanding, milling or turning of your casting resin, we suggest using Epoxy Clear with sawdust, a wood-like resin that can be worked like softwood.
You also have the choice of a thin liquid, but very fast-curing casting polyurethane. This exists in different variants, in order to quickly, thinly and shrink-wrapped cast figures or shaped pieces.
How to cast and fill holes and cracks in damaged steps in concrete?
We recommend reinforcing the liquid polyester resin H30-AZUR with fillers such as quartz sand. With this you can repair damaged concrete in any desired layer thickness. This by simply pouring. If you want a certain colour, you can add colour pigment to the mixture.
How do I fill joints and seams in concrete?
We recommend the grey-coloured, tough elastic casting resin type Flexovoss K6S. A 2-component polyurethane resin for casting joints, pits and holes in concrete or stone.
We recommend using the colourless casting resin type GTS, based on polyester. This transparent casting resin can be given the right colour with the universal PU pigments or with fillers like marble powder.
How to cast UV-resistant or crystal-clear electronic components of LED lighting?
We recommend a colourless 2-component casting resin such as Epoxy Clear. This can be used for casting and moulding LED lights as protection against weather influences and UV exposure.
How do I quickly cast model parts and 3D replicas?
PUR MC 6
Here we recommend the rapid casting resin MC6. A quick-drying, thin, liquid, 2-component polyurethane resin specifically for model making. Extremely suitable for casting thin layers.
Here we recommend working with the universal colour pigment that can be added to a transparent polyester, epoxy or polyurethane resin.
How to produce replicas and art objects with a wood-like structure?
Here we recommend the epoxy-based casting resin that can be mixed with sawdust. This is for casting objects with a wood-like structure or wood imitation.
How to embed photos and objects with casting resin?
We recommend using the thin liquid casting resin GTS, based on polyester. This resin is crystal clear and can be coloured with the universal PU pigments. This for making jewellery and ornaments in a transparent resin or coloured in a translucent colour.
